Tempered Glass Gaming PC Case

Contour Sapphire ATX Gaming Case

The Sapphire ATX case is a premium entry into the Gaming Case market. Supporting a full ATX Motherboard and Power Supply it has the capacity to be loaded with a huge variety of premium components, including full-size graphics cards. At the same time, the Sapphire case is not oversized, allowing for those who would like a full system in a compact ATX case. A tempered glass front panel offers a stylish look with an asymmetric topline design revealing the front USB and Audio ports. Behind the Glass front panel, 3 large 120mm RGB fans glow through the distinctive honeycomb bezel when the system is powered on.The fans are connected to an RGB controller with remote control. With a full glass side panel, all the components are well lit and on display.  There is space for the option to fit additional fans both at the top and rear and above the PSU cover depending on the configuration. At the top and bottom, a dust filter helps keep the inside clean. A sleek and stylish entry to Premium Gaming.

Contour Sapphire ATX Gaming Case

Specifications

• FORM FACTOR: ATX Tower
• PSU: PS2
• 5.25″ Bay: 0
• 3.5″ Bay: 0
• Int. 3.5″ HDD Bay: 2
• Int. 2.5″ SSD Bay: 3
• Expansion Slots: 7
• I/O Ports: USB 3.0 x1, USB 2.0 x 2, HD AUDIO in/out, Power LED
• Liquid Radiator Fitting Size F 240. R 120 mm
• VGA Card Max 370mm
• CPU Cooler Max 159mm
• Dims, W x H x D 193mm(W) x 450mm(H) x 452mm(D)

Other Features

• Chassis SPCC Coating 0.5mm
• 3×120 FRONT FAN (3xRGB T 120 FANS Incl.)
• 1×120 REAR FAN option
• 1×120 TOP FAN option
• 1×120 BASE FAN option
• Tinted Tempered Glass:  Left Side & Front Panel
• Base Dust Filter & Top Dust Filter

Contour EOS ATX Gaming Case

The Contour EOS is a substantial ATX case with a quality and modern design.  It features clear glass panels to the front, top and both sides.  The back is made of high-quality steel.  The glass panels are fixed in place with rubber mountings and secured with thumbscrews.  Inside the chassis, there is a large PSU shroud, at the front end of which are two 3.5″ drive bays and on top of the shroud are 2 x 2.5″ bays for your SSDs.

The front of the chassis houses 3 x 120mm cooling fans which are included with the case.  These fans have the latest style double ring red LEDs and give an attractive appearance to the case as they can be viewed through the glass front and also from the inside of the chassis through the glass side panels.

At the top of the chassis, there is space for a further 2 x 120mm cooling fans.  This area can be used for liquid cooling radiators up to 360mm in length.  A gap of 57mm from the top edge of the motherboard PCB to the top of the radiator mounting space will allow for the thickness of an average radiator and cooling fan.  The mounting is also offset by a few mm so as to ensure clearance of any motherboard components placed right at the edge of the motherboard PCB.

The motherboard mounting tray is exceptionally deep at 390mm so there will be no problem mounting even extended ATX motherboards and very long graphics cards will prove no issue.

Contour Sapphire ATX Gaming Case

Specifications

• Dimensions (LxWxH) 480 x 220 x 510mm
• Motherboard Support Mini-ITX, Micro-ATX, ATX, E-ATX (support upto 12″ x 10.7″)
• Expansion Slots 7
• Drive Bays 5.25″ 0, 2.5″/3.5″ 2, 2.5″ SSD 2
• I/O Port s: USB 3.0 x 1, USB 2.0 x 2, Audio In & Out (supports HD Audio)

Materials

• Outlook: Plastic, Steel & Glass
• Body: Steel
• Side panels: Tempered Glass
• Front panel: Tempered Glass
• Top Panel: Tempered Glass

Pre-installed Fan(s)

• Front 3 x 120mm x 25mm Red LED Ring Fan 1000 Rpm
• Rear None

Fan Support

• Top 2 x 120mm fan
• Rear 1 x 120mm fan

Liquid Cooling Support

• Top 120mm or 240mm (maximum thickness clearance 57mm)
• Front None
• Rear 120mm

Clearance

• CPU Cooler 160mm
• GPU 390mm
• Power Supply Support Bottom mount, ATX PS2

Contour Helios ATX Gaming Case

The Contour Helios is a mid-size ATX cube case with a quality and modern design. It features clear glass panels to the front, top and both sides. The back is made with high quality steel. The front and top are each fitted with large 200mm red LED cooling fans. The glass panels are fixed in place with rubber mountings and secured with thumbscrews. At the left side of the chassis there is space for 2 x 2.5″ SSDs and 2 x 3.5″ hard drives.

The large 200mm LED fans give the chassis an attractive appearance as they can be viewed through the glass front and also from the inside of the chassis through the glass side panels. Unusually, the mainboard mounts to the right-hand side of the chassis and is mounted with the expansion slots toward the top, which is the opposite way around to most chassis.

The area in front of the motherboard tray can be used for liquid cooler radiators up to 240mm in length. A gap of only 55mm from the bottom edge of a full ATX motherboard PCB to the top of the radiator mounting space will allow for the thickness of a slim radiator and cooling fan. We recommend you check the total thickness of your radiator before ordering as thicker units can foul the edge of large motherboards.

The motherboard mounting tray only big enough for standard ATX motherboards of 244mm depth we don’t recommend this chassis for use with extended ATX motherboards and very long graphics cards could prove an issue if they are longer than 244mm. The PSU mount is designed to accept ATX PS2 power supplies right up to 220mm long.

Contour Sapphire ATX Gaming Case

Specifications

• Dimensions (LxWxH) 380 x 300 x 475mm
• Motherboard Support Mini-ITX, Micro-ATX, ATX
• Expansion Slots 7
• Drive Bays 5.25″ 0, 3.5″ 2, 2.5″ SSD 2
• I/O Port s: USB 3.0 x 1, USB 2.0 x 2, Audio In & Out (supports HD Audio)

Materials

• Outlook: Plastic, Steel & Glass
• Body: Steel
• Side panels: Tempered Glass
• Front panel: Tempered Glass
• Top Panel: Tempered Glass

Pre-installed Fan(s)

• Front 1 x 200mm x 25mm Red LED Fan 800 Rpm
• Top 1 x 200mm x 25mm Red LED Fan 800 Rpm

Fan Support

• Top No further fans
• Rear None

Liquid Cooling Support 

• Top None
• Front 120mm, 240mm (maximum thickness clearance 55mm)
• Rear None

Clearance

• CPU Cooler 155mm
• GPU 280mm without liquid cooling or 244mm with
• Power Supply Support Bottom mount, ATX PS2 up to 220mm long

Contour Spacegate ATX Gaming Case

The Contour Spacegate is a large ATX case with a quality and modern design. It features tinted glass panels to the front and both sides. The back and top are made of high-quality steel and the top is vented with mounting positions for up to 3 x 120mm or 140mm cooling fans. The glass panels are fixed in place with rubber mountings and secured with thumbscrews. The inside of the chassis is left very open, offering exceptional access to components. At the front of the mainboard area are 2 x 3.5″ drive bays (at the rear) and 3 x 2.5″ bays for your SSDs.

The front of the chassis houses 3 x 120mm RGB cooling fans which are included with the case. These fans have the latest style double ring RGB LEDs and give an attractive appearance to the case as they can be viewed through the glass front and also from the inside of the chassis through the glass side panels. The chassis includes an RGB controller which is fully integral to the chassis with lighting controls accessed from the front bezel.

At the top of the chassis, there is space for a further 3 x 120mm or 140mm cooling fans. There is a removable magnetic dust filter attached to the outside. This area can be used for liquid cooling radiators up to 360mm in length. A gap of 45mm from the top edge of the motherboard PCB to the top of the radiator mounting space will allow for the thickness of a slim radiator and cooling fan or alternatively, larger thickness cooler radiators can be mounted if offset away from the mainboards. The mounting is also offset by a few mm so as to ensure clearance of any motherboard components placed right at the edge of the motherboard PCB. 120mm, 240mm and 360mm radiator sets will sit 40mm above the mainboard if they overhang, 140mm and 280mm radiator sets will sit just 20mm above the mainboard if they overhang so users should be careful of clearance from mainboard heatsinks on the edge of the board.

The motherboard mounting tray is quite deep at 300mm so there will be no problem mounting even extended ATX motherboards and very long graphics cards will prove no issue with over 450mm clearance for IO cards. The PSU mount is designed to accept ATX PS2 power supplies right up to 220mm long and has rubber mounts to reduce vibration and a dust filter covering the bottom PSU air intake.

Contour Sapphire ATX Gaming Case

Specifications

• Dimensions (LxWxH) 530 x 250 x 502 mm
• Motherboard Support Mini-ITX, Micro-ATX, ATX, E-ATX (support upto 12″ x 11.5″)
• Expansion Slots 8
• Drive Bays 5.25″ 0, 2.5″/3.5″ 2, 2.5″ SSD 3
• I/O Port s: USB 3.0 x 2, USB 2.0 x 2, Audio In & Out (supports HD Audio)

Materials

• Outlook: Plastic, Steel & Glass
• Body: Steel
• Side panels: Tempered Glass
• Front panel: Tempered Glass
• Top Panel: Steel with Mesh Air Filter

Pre-installed Fan(s)

• Front: 3 x 120mm x 25mm RGB LED Ring Fan 1000 Rpm
• Rear None

Fan Support

• Top 3 x 120mm / 140mm fans
• Rear 1 x 120mm fan / 140mm fan

Liquid Cooling Support

• Top 120mm, 140mm, 240mm, 280mm (maximum thickness clearance for 140mm and 280mm rads is 45mm)
• Front None
• Rear 120 or 140mm

Clearance

• CPU Cooler 180mm
• GPU 450mm
• Power Supply Support Bottom mount, ATX PS2 up to 220mm long